7.Lift the memory/wireless module compartment cover (2) away from the computer.

NOTE: If a memory module is installed in the expansion memory module slot, first remove the expansion memory module.

8.Remove the memory module from the primary memory slot:

a.Pull away the retention clips (1) on each side of the memory module. The memory module tilts up.

CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module.

b.Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot.

To protect a memory module after removal, place it in an electrostatic-safe container.

80 Chapter 9 Memory modules

Page 90
Image 90
HP dm4-1162us, dm4-1160us manual