Removal and Replacement Procedures
5.3Preparing the Notebook for Disassembly
Before you begin any removal or installation procedures:
1.Shut down the notebook. If you are unsure whether the notebook is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the notebook.
3.Disconnect the power cord.
Spare Part Number Information
Battery packs |
|
|
|
4.Remove the battery pack by following these steps:
a.Turn the notebook upside down with the front panel toward you.
b.Slide and hold the battery release latch 1 to the left. (The front edge of the battery pack disengages from the notebook.)
c.Lift the front edge of the battery pack up and swing it back 2.
d.Remove the battery pack.
Maintenance and Service Guide |