Removal and Replacement Procedures
1.Prepare the notebook for disassembly (Section 5.3) and remove the following components:
❏Optical drive (Section 5.7)
❏Switch cover (Section 5.8)
❏Keyboard (Section 5.9)
❏Display assembly (Section 5.10)
❏Base enclosoure (Section 5.11)
❏
❏Speaker assembly (Section 5.13)
2.Turn the top cover right side up with the front panel toward you.
3.Release the ZIF connector 1 to which the TouchPad cable is connected and disconnect the cable 2 from the system board.
Disconnecting the TouchPad Cable
Maintenance and Service Guide |