Removal and Replacement Procedures

Steps 7 and 8 apply only to HP Compaq nx4800 and Compaq Presario V2000 notebook models.

7.Release the ZIF connector 1 to which the LED board cable is connected and disconnect the cable 2 from the system board.

8.Remove the 4 PM2.0×4.0 screws 3 that secure the system board to the top cover.

Disconnecting the LED Board Cable and Removing the System Board Screws, HP Compaq nx4800 and Compaq Presario V2000 Notebook Models Only

5–58

Maintenance and Service Guide

Page 166
Image 166
HP DV1000 nx4800 manual Removal and Replacement Procedures