Product Information

Drive Specifications

Interfaces

Installation and Configuration

Drive Operation

Tips and Techniques

Software

Maintenance

Troubleshooting

Warranty and Support

Release Notes

Discontinued Products

 

 

 

 

Electrical Specifications

Power

Table 14 Connectors and Jumper Block

Connector

Description

 

 

DC Power Inlet

4 pin Amphenol

 

 

Audio Output

4 pin per MPC-2 spec. (rear of drive)

 

1V typical RMS output voltage

 

3.5 mm Headphone Jack (front of drive)

 

0 to 3.5V RMS output voltage

 

 

Signal Connector

40 pin ATA-2 dual row header, shrouded & keyed

 

 

Rear Jumper Block

ATAPI ID selection (Master, Slave, CSEL)

 

 

Power Management

The drive is Energy Star compliant.

Power Input

The internal PC power supply for the drive is:

■ 5 VDC with +/-5% tolerance, +12 VDC with +/-10% tolerance

Power Consumption

The amount of power used by this drive is 25 Watts, maximum.

Front Audio Output

The front audio output is an industry-standard stereo mini type.

Ground Tab

The ground tab is an AMP FASTON terminal 61761-2 or its equivalent.

Tray Locking Mechanism

There is a locking mechanism on the tray such that when power is off and the tray is closed, the tray will be locked in a closed position. This locking mechanism has a manual override.

hp dvd-writer dvd100i Technical Support Solutions Guide 10/25/01

Electrical Specifications

⇐

⇒

24