Product Information | Drive Specifications | Interfaces | Installation and Configuration |
Drive Operation | Tips and Techniques | Software | Maintenance |
Troubleshooting | Warranty and Support | Release Notes | Discontinued Products |
|
|
|
|
Restarting the Computer
1.Replace the case on the computer.
2.Connect the computer and all attached devices to power.
Figure 26 Connect the Computer to Power
3.Turn on the computer.
The installation software will verify that the HP drive is correctly installed.
4.Press the Load/Eject button to make sure the drive is receiving power by opening and closing the tray.
Installing the Software
1.Follow the instructions on the screens to install the HP software applications.
The following applications are installed using an
■HP MyDVD (described on page 72)
■PowerDVD (described on page 78)
■HP RecordNow 3.0 (described on page 53)
■HP DLA 2.5 (described on page 65)
■HP Simple Backup (described on page 75)
NOTE: No hardware drivers need to be installed. The hp
2.When the Setup Complete screen appears, select Yes to restart the computer, then click Finish.
3.After the computer has been restarted, the hp
Vendor Software Installation
After the user has finished installing the HP drive and restarted their computer, they must insert the additional software installation CDs to invoke the vendors’ install programs.
hp | Installing the Software | ⇐ | ⇒ | 42 |