Product Information | Drive Specifications | Interfaces | Installation and Configuration |
Drive Operation | Tips and Techniques | Software | Maintenance |
Troubleshooting | Warranty and Support | Release Notes | Discontinued Products |
|
|
|
|
14.Locate an available power cable connector in the computer.
Power cable connectors usually have yellow, red, and black wires. If you do not have an available connector, you need to purchase a Y power connector from your computer dealer.
15.Plug the power cable into the back of the HP drive. The connector only fits one way. (See Figure 24.)
NOTE: Improper connection of the power cable will damage the drive.
16.Slide the HP drive completely into the drive bay.
17.Secure the HP drive into the drive bay with the screws (or rails, if your computer uses rails). (See Figure 25.)
Figure 25 Securing the Drive in the Bay
Figure 24 Power Connector on Drive Back
hp | Installing the hp | ⇐ | ⇒ | 41 |