Table 2-1 Solving General Problems (continued)
System does not power on and the LEDs on the front of the computer are not flashing.
Cause | Solution | |
|
|
|
| OR |
|
| Press and hold the power button for less than 4 seconds. If the | |
| hard drive LED does not turn on green then: | |
| 1. | Check that the unit is plugged into a working AC outlet. |
| 2. | Open hood and check that the power button harness is |
|
| properly connected to the system board. |
| 3. | Check that both power supply cables are properly |
|
| connected to the system board. |
| 4. | Check to see if the 5V_aux light on the system board is |
|
| turned on. If it is turned on, then replace the power button |
|
| harness. |
| 5. | If the 5V_aux light on the system board is off, then replace |
|
| the power supply. |
| 6. | Replace the system board. |
|
|
|
ENWW | Solving General Problems 13 |