Table
Control panel message | Description | Recommended action | |
|
|
|
|
BIOS information passed to the MEBx | 1. | Reboot the computer. | |
| resulted in a failure. | 2. | If the error persists, update to the latest |
|
| ||
|
|
| BIOS version. |
|
| 3. | If the error still persists, replace the |
|
|
| system board. |
|
|
|
|
MEBx operation experienced a hardware | 1. | Reboot the computer. | |
| error during communication with ME. | 2. | If the error persists, update to the latest |
|
| ||
|
|
| BIOS version. |
|
| 3. | If the error still persists, replace the |
|
|
| system board. |
|
|
| |
Invalid Electronic Serial Number | Electronic serial number is missing. | Enter the correct serial number in Computer | |
|
| Setup. | |
|
|
|
|
Network Server Mode Active and No | Keyboard failure while Network Server Mode | 1. | Reconnect keyboard with computer |
Keyboard Attached | enabled. |
| turned off. |
|
| 2. | Check connector for bent or missing |
|
|
| pins. |
|
| 3. | Ensure that none of the keys are |
|
|
| depressed. |
|
| 4. | Replace keyboard. |
|
|
| |
Parity Check 2 | Parity RAM failure. | Run Computer Setup and Diagnostic utilities. | |
|
|
|
|
System will not boot without fan | CPU fan not installed or disconnected in | 1. | Remove the computer cover, press the |
| VSFF chassis. |
| power button, and see if the processor |
|
|
| fan spins. If the processor fan is not |
|
|
| spinning, make sure the fan's cable is |
|
|
| plugged onto the system board header. |
|
|
| Ensure the heatsink is properly seated |
|
|
| and installed. |
|
| 2. | If the fan is plugged in and the heatsink |
|
|
| is properly seated but the fan does not |
|
|
| spin, then replace the |
|
|
| assembly. |
|
|
|
|
56 Appendix A POST Error Messages | ENWW |