HP E8491A manual Iclear Sicl interface name, logical address

Figure B-4. Output of ivxisc (cont’d).

Using iclear The iclear function is used to clear the interface (HP E8491A) or individual message-based instruments in the VXI mainframe. iclear is executed from the DOS command prompt (..\siclnt\bin or \sicl95\bin directory) as:

iclear <SICL interface name, [logical address]>

SICL interface name is the name (vxi) and number listed in the ‘I_O Config’ SICL Interface Name window. logical address is the address of the message-based VXI instrument to be cleared.

If a logical address is not specified, the (E8491A) interface is cleared and the resource manager is started.

Appendix B Editing the HP E8491A Resource Manager Configuration 75