Installing the Memory Module
The main menu for libdiag should be displayed.
Figure 3: Libdiag main menu
Changing the Library Mode
To set the library for HP mode:
1.Initialize
a.Click Config.
b.Select Initialization, then select Init
2.Set the model number, bins, and drives as shown in step 3 through step 6. See Table 2 on page 20 to find the correct model number and drive type for your library.
3.Click Config, then select Configure System. A screen appears that lists model numbers on the left and the current model number on the right.
4.Click the current model number and backspace to delete it. Type in the correct model number and press Enter.
5.At the next screen, select the number of bins and drives, and the SCSI ID of library.
HP StorageWorks ESL9000 Series Tape Library Memory Module Upgrade Guide | 17 |
