Optical drive
NOTE: The optical drive spare part kit includes an optical drive bezel and optical drive bracket.
Description | Spare part |
| number |
|
|
DVD±RW and | |
|
|
|
|
Optical Drive protective insert | |
|
|
Before removing the optical drive:
1.Battery (see Battery on page 41)
2.Service door (see Service door on page 42) Remove the optical drive:
1.Remove the Phillips 6.0 x 2.5 screw (1) that secures the optical drive to the computer.
2.Insert a straightened paper clip (2), into the release access opening in the bezel, and then press inward.
3.Grasp the bezel and slide the optical drive out of the computer (3).
4.To replace the optical drive bracket, position the optical drive with the optical drive bracket toward you.
5.Remove the two Phillips 3.0 x 2.0 screws (1) that secure the optical drive bracket to the optical drive.
Component replacement procedures | 45 |
