Security cable lock

NOTE: The security cable lock is included with the base enclosure, spare part number 639569-001.

Before removing the security cable lock, remove the following components:

1.Battery (see Battery on page 41)

2.Service door (see Service door on page 42)

3.Hard drive (see Hard drive on page 43)

4.Optical drive (see Optical drive on page 45)

5.Keyboard (see Keyboard on page 51)

6.Top cover (see Top cover on page 53) Remove the security cable lock:

1.Remove the two Phillips 4.0 x 2.5 screws that secure the security lock to the base enclosure.

2.Lift the security lock straight up to remove it from the computer.

Reverse this procedure to install the security cable lock.

Component replacement procedures

61

Page 69
Image 69
HP G6 B9P54UA manual Security cable lock