15.Remove the display panel (2) from the display enclosure. The display panel is available using the spare part number
Reverse this procedure to install the display panel.
16.To replace the display hinges, remove the two Phillips PM 3.0 x 2.0 screws (1) that secure each hinge to the display panel.
17.Remove the display hinges (2) from the display panel. The display hinges are available using spare part number
Reverse this procedure to install the display hinges.
18.To replace the wireless antenna transceivers, lift up on the silver transceiver (1), and then release the adhesive material from the display cover.
Component replacement procedures | 67 |
