Power connector
Description | Spare part number |
|
|
Power connector (includes cable) | |
|
|
Before removing the power connector cable, remove the following components:
1.Battery (see Battery on page 41)
2.Service door (see Service door on page 42)
3.Hard drive (see Hard drive on page 43)
4.Optical drive (see Optical drive on page 45)
5.Keyboard (see Keyboard on page 51)
6.Top cover (see Top cover on page 53) Remove the power connector:
1.Turn the computer
2.Disconnect the power connector cable (1) from the system board.
3.Lift the power connector (2) from the clips built into the base enclosure.
Reverse this procedure to install the power connector.
62 | Chapter 4 Removal and replacement procedures |
