Expanding Functionality with Cards

Use an Optional Secure Digital Card

Use an optional Secure Digital (SD) card to increase the memory capacity of your Compaq iPAQ Pocket PC.

CAUTION: Install the SD card only into the SD memory slot on the Compaq iPAQ Pocket PC. You cannot install this card into a Single-slot or Dual-slot PC Card Expansion Pack or a CompactFlash Card Expansion Pack.

Install the Secure Digital card

1.Locate the Secure Digital (SD) memory slot on your Compaq iPAQ Pocket PC

2.Insert the SD card into the external memory slot

Push the connection edge of the card firmly into the external memory slot until it clicks into place or is flush with the top of the slot

Remove the Secure Digital card

1.Close all applications and files using the Secure Digital (SD) card

2.Push down on the SD card

The SD card will pop out of the memory slot

3.Pull the SD card from the memory slot

Locate information about Secure Digital cards

Locate information about Secure Digital cards at <http://www.compaq.com/products/handhelds/pocketpc/cfcardlist.shtml>

Tips

I cannot insert my card

1.Make sure you are not inserting the card at an angle

2.Make sure you insert the connection area first

I cannot establish a connection

1.Make sure your card is properly inserted into the memory slot on your expansion pack

2.Follow the manufacturer’s instructions to install the driver

My Compaq iPAQ Pocket PC cannot recognize my card

Perform a soft reset of your Compaq iPAQ Pocket PC

1.Insert the stylus into the unit reset switch at the bottom of your Compaq iPAQ Pocket PC

2.Press the switch for 1 second

iPAQ Pocket PC H3800 Series Reference Guide

91

Page 91
Image 91
HP H3800 e manual Use an Optional Secure Digital Card, Install the Secure Digital card, Remove the Secure Digital card