(continued)
Light description/Light pattern | Explanation and | |
| recommended action | |
| again, and resend the | |
| print job. |
|
Resume light blinks, left and right print cartridge lights cycle. | Media jam or switch | |
| motor stall. | |
| Clear the jammed | |
| paper. For more | |
| information, see Clear | |
| jams. After clearing the | |
| jam, press | |
| (Resume button) to | |
| continue the print job. | |
| If no paper jam exists, | |
| press | (Resume |
| button). If this does not | |
| work, try turning the | |
| printer off and then on | |
| again, and resend the | |
| print job. |
|
Power light on, resume light blinks, right print cartridge light turns on | Ink service module | |
twice as long as off. | almost full. | |
• If you have a replacement for the ink service module, replace it immediately by following the instructions that came with it.
• Otherwise, visit: www.hp.com/ support or contact Customer Support to get a replacement. See Support and warranty.
In the meantime,
you can press 
(Resume button) to continue printing, but this light error state will remain until the ink service module is replaced. When the ink service module is full, the printer will stop printing.
Interpret | 99 |
