HP HB4 manual Writer Hp dvd Bay expansion

1Open the bay cover (A on page 64). Hold the cover on each side near the hinges, then lift the cover and slide it toward the back of the chassis (C on page 65). Gently lift it off.

To make it easy to insert the cables during step 3, grasp the tab (T) and pull it out toward the front of the chassis (E on page 66). Replace the tab when done threading the cables.

2Place the camera cradle (H) (included with the camera) onto the DockSpot (J).

3Place the DockSpot into the bay. Thread the data cables (K and L) and power cable (M) through the cable tunnel opening at the back of the bay and connect them to the DockSpot.

	T
	L
K	H
	J

M

& cd	-writer
writer
hp dvd

/ bay expansion

4To prepare the new cover, push the two black dots on the inside to free the insert section of the cover, and then move the insert up and out of the cover (N).

N

working with sound, pictures, and video 67