HP J6400 manual Store printing supplies

6.Clean the face and edges around the ink nozzle area with the swab, as shown below.

1 Nozzle plate (do not clean)

2 Face and edges around the ink nozzle area

CAUTION: Do not clean the nozzle plate.

7.Slide the print cartridge back into the slot. Push the print cartridge forward until it clicks into place.

8.Repeat if necessary for the other print cartridge.

9.Gently close the print cartridge door and plug the power cord into the back of the device.

Store printing supplies

The print cartridge protector is designed to keep a print cartridge secure and prevent it from drying out when it is not being used. Whenever you remove a print cartridge from the device with the intention of using it again later, store it in the print cartridge protector. For example, store the black print cartridge in a print cartridge protector if you are removing it so you can print high-quality photos with the photo and tri-color print cartridges.

NOTE: If you do not have a print cartridge protector, you can order one from HP Support. For more information, see Support and warranty. You can also use an air- tight container, such as a plastic tub. Make sure the nozzles are not touching anything when you store the print cartridges.

Work with print cartridges 129