HP J6400 manual Copy, Make copies from the device control panel, Change the copy settings

4 Copy

You can produce high-quality color and grayscale copies on a variety of paper types and sizes.

NOTE: Copying from the HP photo and imaging software is only available on the Mac OS. See the software's help for more information.

NOTE: If you are copying a document when a fax arrives, the fax is stored in the device memory until the copying finishes. This can reduce the number of fax pages stored in memory.

This section contains the following topics:

•Make copies from the device control panel

•Change the copy settings

•Set the number of copies

•Set the copy paper size

•Set the copy paper type

•Change copy speed or quality

•Resize an original to fit onto letter or A4 paper

•Copy a legal-size document onto letter paper

•Adjust the lightness and darkness of your copy

•Enhance blurred areas of your copy

•Enhance light areas of your copy

•Cancel a copy job

Make copies from the device control panel

You can make quality copies from the device control panel.

To make a copy from the device control panel

1.Make sure you have paper loaded in the input tray.

2.Place your original face down on the scanner glass. For more information, see Load originals.

3.Do one of the following:

•Press START COPY Black to start a black-and-white copy job.

•Press START COPY Color to start a color copy job.

NOTE: If you have a color original, pressing START COPY Black produces a black-and-white copy of the color original, while pressing START COPY Color produces a full-color copy of the color original.

Change the copy settings

You can customize the copy settings to handle nearly any task.

36 Copy