Presenting from a Networked Computer

6.For an Ad Hoc connection, set the following properties:

■Set the Authentication Mode to Ad Hoc.

■Match the Desired SSID and WEP Encryption to the settings on the projector.

■If a channel setting is available, set the channel to Auto.

For an Infrastructure connection, set the following properties:

■Set the Authentication Mode to Infrastructure.

■Match the Desired SSID and WEP Encryption to the access point settings as specified by the network administrator.

■If a channel setting is available, set the channel to Auto.

7.Click OK.

8.Right-clickWireless Network Connection again, and click Properties.

9.Double-click TCP/IP. For each type of connection, use the following values:

■For an Ad Hoc connection, set the following properties:

❏Select Obtain an auto IP address.

❏Select Obtain DNS server address automatically.

■For an Infrastructure connection, check with your system administrator to obtain the correct settings.

Showing Presentations

This section describes how to show presentations on a computer.

■“To start a presentation” on page 24

■“To stop showing your presentation” on page 25

■“To include other presenters” on page 26

■“To disconnect and free the projector” on page 27

User’s Guide

23