HP M2260AU, M2401EA, M2405LA, M2406EA, M2308EA, M2301XX Removing a Mini PCI Communications Module

Removal and Replacement Procedures

✎Before disconnecting the cables, make note of which wireless antenna cable is attached to which antenna clip on the Mini PCI communications module.

7.Disconnect the two wireless antenna cables 1 from the Mini PCI communications module.

8.Spread the two retaining tabs 2 that secure the Mini PCI communications module to the communications compartment socket. (The front edge of the module rises up).

9.Remove the wireless communications module 3 by pulling the module away from the socket at a 45-degree angle.

✎Mini PCI communications modules are designed with a notch 4 to prevent incorrect installation into the Mini PCI socket.

Removing a Mini PCI Communications Module

Reverse the above procedure to install a Mini PCI communications module.

5–18 Maintenance and Service Guide