HP M251NW manual Use HP ePrint touchscreen control panel, Touch the Enable Web Services button

Use HP ePrint (touchscreen control panel)

NOTE: This section applies to the HP LaserJet Pro 200 color M251nw Printer model only.

1.To use HP ePrint, you must first enable HP Web Services.

a.From the Home screen on the product control panel, touch the Web Services button.

b.Touch the Enable Web Services button.

When the Web Services option is enabled, the product prints an information sheet that includes the product code and instructions to sign up at www.eprintcenter.com.

2.Once you have registered the product, use the HP ePrintCenter Web site to define security settings and to configure default print settings for all HP ePrint jobs sent to this product.

a.Go to www.hpeprintcenter.com.

b.Click Sign In, and enter your HP ePrintCenter credentials or sign up for a new account.

c.Select your product from the list, or click + Add printer to add it. To add the product, you need the printer code, which is the segment of the product email address that is before the @ symbol.

NOTE: This code is valid for only 24 hours from the time you enable HP Web Services. If it expires, follow the instructions to enable HP Web Services again, and obtain a new code.

d.To prevent your product from printing unexpected documents, click ePrint Settings, and then click the Allowed Senders tab. Click Allowed Senders Only, and add the email addresses from which you want to allow ePrint jobs.

e.To set up default settings for all ePrint jobs sent to this product, click ePrint Settings, click Print Options, and select the settings that you want to use.

3.To print a document, attach it to an email message sent to the product's email address.

52 Chapter 3 Print ENWW