Print a cleaning page

Print a cleaning page to remove dust and excess toner from the paper path if you are having any of the following problems:

●Specks of toner are on the printed pages.

●Toner is smearing on the printed pages.

●Repeated marks occur on the printed pages.

Print a cleaning page (LCD control panel)

NOTE: This section applies to the HP LaserJet Pro 200 color M251n Printer model only.

1.At the control panel, press the OK button to open the menus.

2.Open the following menus:

●Service

●Cleaning Page

3.Load plain paper in Tray 1, and then press the OK button to start the cleaning process.

4.The product prints the first side and then prompts you to remove the page from the output bin and reload it in Tray 1, keeping the same orientation (the side with the black stripe should be face- down with the arrow toward the back of the product).

5.Press the OK button to continue the cleaning process. Wait until the process is complete. Discard the page that prints.

Print a cleaning page (touchscreen control panel)

NOTE: This section applies to the HP LaserJet Pro 200 color M251nw Printer model only.

1.From the Home screen on the product control panel, touch the Setup button.

2.Touch the Service menu.

3.Touch the Cleaning Page button.

4.Load plain letter or A4 paper when you are prompted.

5.Touch the OK button to begin the cleaning process.

6.The product prints the first side and then prompts you to remove the page from the output bin and reload it in Tray 1, keeping the same orientation (the side with the black stripe should be face- down with the arrow toward the back of the product).

7.Press the OK button to continue the cleaning process. Wait until the process is complete. Discard the page that prints.

ENWW

Improve print quality 103