Tray

The tray is used to align the computer on the expansion base. The left side of the computer should be aligned with the left side of the tray when docking the computer.

1.Prepare the expansion base for disassembly (Section 5.3).

2.Position the expansion base so the front faces forward.

3.Remove the label ➊ and screw ➋ located behind the retaining latch ➌ (Figure 5-5).

4.Pull forward ➍ on the retaining latch to remove the tray.

Figure 5-5.Removing the Tray

Reverse the removal procedure described above to install the tray.

Removal and Replacement Procedures

5-5