5.12 Control Panel

1.Prepare the expansion base for disassembly (Section 5.3).

2.Remove the tray (Section 5.4).

3.Remove the connector cover (Section 5.5).

4.Remove the rear bezel (Section 5.6).

5.Remove the top cover (Section 5.8).

6.Remove the MultiBay (Section 5.11).

7.Disconnect the right speaker cable ➊ from the MultiBay (Figure 5-26).

8.Remove the screw that secures the control panel to the MultiBay ➋.

9.Remove the control panel from the MultiBay ➌.

Figure 5-26.Removing the Control Panel

Reverse the removal procedure described above to attach the control panel to the MultiBay.

5-26Removal and Replacement Procedures