5.10 Left Speaker
1.Prepare the expansion base for disassembly (Section 5.3).
2.Remove the tray (Section 5.4).
3.Remove the rear bezel (Section 5.6).
4.Remove the top cover (Section 5.8).
5.Remove the bezel cage (Section 5.9).
6.Remove the three screws ➊ that secure the left speaker to the base assembly.
7.Disconnect the left speaker cable from the MultiBay ➋ (Figure
8.Remove the left speaker ➌ from the base assembly.
Figure 5-23. Removing the Left Speaker
Reverse the removal procedure described above to install the left speaker.
Removal and Replacement Procedures |
