Special media for printing

This device supports printing on special media.

Envelopes

●Store envelopes flat.

●Envelopes should not be wrinkled, nicked, stuck together, or otherwise damaged. Do not use envelopes that have clasps, snaps, windows, coated linings, self-stick adhesives, or other synthetic materials.

●Only use envelopes where the seam extends all the way to the corner of the envelope as indicated in the following illustration.

1Acceptable

2Unacceptable

●Envelopes that contain a peel-off adhesive strip or more than one flap that folds over to seal must use adhesives that are compatible with the heat and pressure in the fuser.

CAUTION: Failure to follow these guidelines can result in jams.

Labels

When selecting labels, consider the quality of each component:

●Only use labels that have no exposed backing between them.

●Labels must lie flat.

●Do not use labels that have wrinkles or bubbles, or are damaged.

●Use only full sheets of labels. This device does not support printing on partial sheets of labels. For instructions on loading labels, see Print Types and tray capacity on page 31

Transparencies

●For tray, media-orientation, and driver settings, see Print Types and tray capacity on page 31.

●Place transparencies on a flat surface after removing them from the device.

ENWW

Special media for printing 25