Connect to a network

The HP LaserJet Professional P1600 printer series can connect to networks through the HP internal networking port.

Supported network protocols

To connect a networking-equipped product to your network, you need a network that uses the following protocol.

●Functional wired TCP/IP network

Install the product on a wired network

NOTE: To resolve network connection problems, see Solve connectivity problems on page 98.

You can install the product on a network by using the HP Smart Install or from the product CD. Before you begin the installation process, do the following:

●Connect the CAT-5 Ethernet cable to an available port on the Ethernet hub or router.

●Connect the Ethernet cable to the Ethernet port on the back of the product.

●Verify that one of the network lights is illuminated on the network port located on the back of the product.

HP Smart Install on a wired network

NOTE: This installation type is supported for Windows only.

1.Print a configuration page and locate the product IP address. See Print information pages on page 52.

2.Open a Web browser using the computer where you want to install the product.

3.Type the IP address for the product in the address line of the browser.

4.Click the HP Smart Install tab.

28 Chapter 4 Connect the product

ENWW