HP manual 89

Table 8-2Control-panel lights (continued)

Light status	Light pattern	State of the product	Action
All lights are off		The formatter is not	1.	Turn off the
NOTE: The power button backlight		connected to the		product.
		product correctly.
is on.			2.	Wait
				30 seconds, and
				then turn on the
				product.
			3.	Wait for the
				product to
				initialize.

Contact HP customer support. See Customer support on page 110.

Attention	, ready	, and go	The formatter is	No action required.
lights cycle. Toner light		is off.	initializing.	Wait for the
				initialization period to

NOTE: The power button backlight	end. The product
	enters the Ready
is on.
	state when the
	initialization period is
	finished.

All lights cycle.

NOTE: The power button backlight is on.

The product is	No action required.
processing a cleaning	Wait for the cleaning
page.	process to end. The
	product enters the
	Ready state when the
	cleaning process is
	finished.

Ready light is on, and all other lights are off.

NOTE: The power button backlight is on.

The product is in the Ready state.

No action required. The product is ready to receive a print job.

ENWW Interpret control-panel light patterns 77