Table
Light status | Light pattern | State of the product Action |
|
|
|
Ready light 
is blinking, and all other lights are off.
NOTE: The power button backlight is on.
The product is | No action required. |
receiving or | The product is |
processing data. | receiving or |
| processing a print |
| job. |
| To cancel the current |
| job, press the cancel |
| button . |
Attention light 
is blinking, and all other lights are off.
NOTE: The power button backlight is on.
The product has experienced an error that can be corrected at the product, such as a jam, an open door, or the absence of paper in the proper tray.
Inspect the product, determine the error, and then correct the error. If the error is the absence of paper in the proper tray or the product is in a manual feed mode, put the proper paper in the tray and follow the onscreen instructions, or open and close the print- cartridge door to resume printing.
Attention light 
is blinking, ready light 
is on, and other lights are off.
NOTE: The power button backlight is on.
The product has experienced a continual error from which it will recover on its own.
To recover from the error and print the available data, press the go button 
.
If the recovery is successful, the product continues to the processing data state and completes the job.
If the recovery is unsuccessful, the product continues to the continuable error state. Try removing any media from the media path and turning the product power off, and then on again.
78 Chapter 8 Solve problems | ENWW |