Table 8-2Control-panel lights (continued)

Light status

 

 

Light pattern

State of the product

Action

 

 

 

 

 

 

 

 

The attention

 

, ready

, and go

The product has

1.

Turn off the

 

lights are on. Toner light

is off.

experienced a fatal

 

product.

error from which it

 

 

 

 

 

 

 

2.

Wait

NOTE: The power button backlight

cannot recover.

 

 

30 seconds, and

is on.

 

 

 

 

 

 

then turn on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

product.

 

 

 

 

 

 

3.

Wait for the

 

 

 

 

 

 

 

product to

 

 

 

 

 

 

 

initialize.

If the error persists, contact HP customer support. See Customer support on page 110.

The ready

and toner

lights are

 

 

The print cartridge is

Order a new print

on.

 

 

 

 

near the estimated

cartridge and have it

 

 

 

 

end of life.

ready. See Order

 

 

 

 

 

NOTE: The power button backlight

 

 

 

parts, accessories,

is on.

 

 

 

 

 

and supplies

 

 

 

 

 

 

on page 104.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Toner light is blinking.

NOTE: The power button backlight is on.

The print cartridge

Reinsert the print

has been removed

cartridge in the

from the product.

product.

ENWW

Interpret control-panel light patterns 79