Replace the separation pad

Normal use with good media causes wear. The use of poor media might require more frequent replacement of the separation pad.

If the product regularly pulls multiple sheets of media at a time, you might need to change the separation pad.

WARNING! Before changing the separation pad, use the power switch to turn the product off, and wait for the product to cool.

NOTE: Before you change the separation pad, clean the pickup roller. See Clean the pickup roller on page 68.

1.Remove the paper and close the main-input tray. Set the product on its front.

2.At the bottom of the product, unscrew the two screws holding the separation pad in place.

ENWW

Manage supplies and accessories 65