Safety Precautions
w
Keep unneeded small parts and other objects out of the reach of small children. These objects can be accidentally swallowed. Also, be careful about packaging materials and plastic sheets.
Set up
Do not place the Plasma TV on sloped or unstable surfaces.
■The Plasma TV may fall off or tip over.
Do not place any objects on top of the Plasma TV.
■If water spills onto the Plasma TV or foreign objects get inside it, a
Do not cover the ventilation holes.
■Doing so may cause the Plasma TV to overheat, which can cause fire or damage to the Plasma TV.
If using the pedestal, leave a space of
3 15/16 inch (10 cm) or more at the top, left and right, 2 3/8 inch (6 cm) or more at the bottom, and 2 3/4 inch (7 cm) or more at the rear. If using some other method for setup, leave a space of 3 15/16 inch (10 cm) or more at the top, bottom, left and right, and 3/4 inch (1.9 cm) or more at the rear.
Avoid installing this product near electronic equipment that is readily affected by electromagnetic waves.
■It may cause interference in image, sound, etc. In particular, keep video equipment away from this product.
AC Power Supply Cord
The Plasma TV is designed to operate on 120 Vv , 50/60 Hz.
Securely insert the power cord plug as far as it will go, and use the clamp to secure it. (See “AC cord” on page 7.)
■If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket plate is loose, they should not be used.
Do not handle the power cord plug with wet hands.
■Doing so may cause electric shocks.
Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not the cable.
■Do not make any modifications to, place heavy objects on, place near hot objects, heat, bend, twist, or forcefully pull the power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage to the cable is suspected, have it repaired at an Authorized Service Center.
If the Plasma TV will not be used for a long period of time, unplug the power cord from the wall outlet.
If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma TV, unplug the power cord immediately.
■Continued use of the TV under these conditions might cause fire or permanent damage to the unit. Have the TV evaluated at an Authorized Service Center. Service to the TV by any unauthorized personnel is strongly discouraged due to its high voltage dangerous nature.
Safety Precautions
Safety Precautions 1
