Chapter 10

1Printer Information: Shows device information (such as the product model number, serial number, and firmware version number), the number of pages printed from the trays and duplexer, the ink level information, and the printhead health status.

2Test Pattern 1: If the lines are not straight and connected, align the printheads. For more information, see To align the printheads.

3Test Pattern 2: If there are thin white lines across any of the colored blocks, clean the printheads. For more information, see To clean the printheads.

4Test Pattern 3: If there are dark lines or white gaps where the arrows are pointing, calibrate the linefeed. For more information, see To calibrate the linefeed.

To align the printheads

Whenever you replace a printhead, the device automatically aligns the printheads to ensure the best print quality. However, if the appearance of your printed pages indicates that the printheads are misaligned, you can start the alignment process manually.

Control panel: Press the Setup button, select Tools, select Align Printer, and then press OK. Press OK when the alignment is done to continue.

Embedded Web server: Click the Settings tab, click Device Services in the left pane, select Align Printheads from the drop-down list in the Print Quality section, and then click Run Diagnostic.

Toolbox (Windows): Click the Services tab, and then click Align Printheads and follow the onscreen instructions.

HP Printer Utility (Mac OS): Click Align from the Information and Support panel.

146 Maintain and troubleshoot

Page 150
Image 150
HP Pro L7550, Pro L7750, Pro L7680, Pro L7650, Pro L7580, Pro L7780, Pro L7555, Pro L7590 manual To align the printheads