Chapter 10
6.Remove the new printhead from its package, and then remove its orange protective caps.
CAUTION: Do not shake printheads after the caps are removed.
7.Insert the printhead into its
8.Pull the printhead latch all the way forward, and then press down to ensure that the latch is properly engaged. You might have to apply some pressure to engage the latch.
9.Close the top cover.
10.Wait while the device initializes the printheads and prints the alignment pages. If the device does not print the pages, start the alignment process manually. For more information, see To align the printheads.
Store printing supplies
This section covers the following topics:
Store ink cartridges
Ink cartridges can be left in the device for extended periods of time. If you remove the ink cartridges, place them in an airtight container, such as a resealable plastic bag.
Store printheads
Printheads can be left in the device for extended periods of time. If you remove the printheads, place them in an airtight container, such as a resealable plastic bag.
Clean the device
This section provides instructions for keeping the device in top working condition. Perform these maintenance procedures as necessary.
152 Maintain and troubleshoot