HP Pro L7580, Pro L7750 manual To turn on accessories on Windows computers, Click Apply Changes

To turn on accessories on Windows computers

After you install the device software on Windows computers, Tray 2 must be turned on in the print driver in order for it to work with the device. (The duplexer does not need to be turned on.)

1.Click Start, point to Settings, and then click Printers or Printers and Faxes. - Or -

Click Start, click Control Panel, and then double-click Printers.

2.Right-click the printer icon, and then click Properties, Document Defaults, or Printing Preferences.

3.Select one of these tabs: Configure, Device Settings, or Device Options. (The name of the tab depends on the print driver and the operating system.) On the selected tab, click the accessory that you want to turn on, click Installed from the drop-down menu, and then click OK.

To turn on accessories on Macintosh computers

The Mac OS automatically turns on all accessories in the print driver when you install the device software. If you add a new accessory later, follow these steps:

1.Click the Printer Setup Utility icon in the Dock.

2.On the Printer List window, click once on the device you want to set up to select it.

3.From the Printers menu, select Show info.

4.Click the Names and Location drop-down menu and select Installable Options.

5.Check the accessory that you want to turn on.

6.Click Apply Changes.

Turn on accessories in the print driver 23