9.Push the module down into the socket, ensuring that the module is fully inserted and properly seated. Make sure the latches are in the closed position (3).
10.Repeat steps 8 and 9 to install any additional modules.
11.Rotate the drive cage back down to its normal position.
CAUTION: Be careful not to pinch any cables or wires when rotating the drive cage down.
Figure
12.Replace the access panel.
13.If the computer was on a stand, replace the stand.
14.Reconnect the power cord and any external devices, then turn on the computer.
15.Lock any security devices that were disengaged when the access panel was removed.
The computer should automatically recognize the additional memory the next time you turn on the computer.
16 Chapter 2 Hardware Upgrades