HP RP5 5810 manual 37Removing the Riser Card Bracket Replacing the Riser Card

11.To remove the riser card, disconnect the hood sensor cable from the system board (1), pull back the arm on the back of the riser card slot (2), then lift the riser card out of the riser card slot (3).

Figure 2-36Removing the Riser Card

12.Remove the two screws that secure the metal bracket to the top of the card and remove the bracket. You do not need to remove the hood sensor from the bracket.

Figure 2-37Removing the Riser Card Bracket

Replacing the Riser Card 35