6 For an 8000 series diskette drive, squeeze inward on both sides of the bracket brace, and lift the brace up and out (1). Remove the two sets of screws (2) (left and right sides) that secure the drive to the drive adapter. Lift the diskette drive out of the drive adapter (3) by sliding the drive back and then up. Ensure that the guide screws (4) (left and right sides) are left in the drive adapter. You are finished with the task of removing the drive.

1

2 3

2

4

2

removing a diskette drive from the drive adapter on the 8000 series

7For the S0000 series 7-In-1 memory card reader, remove the reader from the drive bay adapter if the adapter is not included with your replacement reader. Remove the two screws (left and right sides) that secure the reader to the adapter. Lift the reader out of the adapter by sliding the reader back and then up. You are finished with the task of removing the reader.

removing a 7-In-1 memory card reader from the drive bay adapter on the S0000 series

upgrading and servicing the pc 95