Chapter 3

Installing and Configuring

3.Pull outward on the latch, grasp the edges of the cover and lift the cover upward to remove it. See Figure 3-1.

Figure 3-1. Removing the Left Side Cover

4. Place the left side cover in a safe place for re-installation later.

WARNING Parts inside the server may be hot; wait for them to cool before touching them.

Replacing the Left Side Cover

To replace the left side cover, follow these steps:

1.If you have been installing accessories or servicing the Server, return the Server to its normal upright position.

2.Use two hands to place the side cover’s lower edge at an angle to the hinge tabs along the bottom of the chassis.

The hinge tabs are keyed to accept the side cover in only one position.

3.With the side cover resting on the hinge tabs, tilt the side cover up until it engages the locking mechanism at the top of the chassis.

16