Chapter 3Installing and Configuring

NOTE

You may need a plastic extension to secure any full-length boards in PCI slots P1 through

 

P5. See Figure 3-23.

 

 

Figure 3-23. PCI Board Plastic Extension

13.Once the accessory board is installed, you may need to install software drivers.

The drivers for the new board are either part of your existing system software or included on a flexible diskette or CD-ROM provided with the accessory board.

Removing Accessory Boards

Apply the same steps as the installation procedure in reverse. Replace the slot cover. See the preceding sections for details.

NOTE

Ensure that you use a slot cover to seal the unused board slot to prevent EMI interference.

 

These slot covers make a better metal-to-metal contact than previous slot cover designs.

 

 

Connecting Peripheral Devices

This section contains instructions for connecting the peripheral control devices, including the UPS and monitor, to the HP Server tc2110.

NOTE

The two USB connectors are reserved for printers, external modems, a keyboard and a

 

mouse, but support for these USB devices is NOS dependent.

 

 

41