HP TippingPoint Next Generation Firewall manual Model Requirements, Power Requirements

Fans and Power Supplies

The S1050F appliance includes one power supply and three cooling fans. These components are not customer-replaceable. For more information about these components, see ”Power Supply and Fan Modules” on page 33.

External Storage Card

The S1050F appliance includes a CFast card slot. The external storage card stores system logs, snapshots, and other system data. The card can be removed and inserted while the appliance is running; however, to do so, you must issue the appropriate unmounting, mounting, and preparation commands in the command line interface (CLI). Refer to ”Using the External CFast Storage Card” on page 37 or the CLI Reference for command syntax.

For more information about the procedure, refer to ”Using the External CFast Storage Card” on page 37.

Ports

All NGFW Appliances, including the S1050F appliance, are equipped with eight copper ports. In addition, appliances include the console and management ports shown in the following figure:

Figure 2-3 Management and Console Ports

11 RJ-45 serial console port

21GbE copper management port

3Link LED

4Activity LED

The management port LEDs indicate link and activity state, as described in the following table. Table 2-1 Management Port LED Descriptions

LED Type	Color	Description
Link	Green	Link is active at 1000Mbps.
	Off	Link is inactive, or is active at 10Mbps or 100Mbps.
Activity	Blinking amber	Data traffic is passing.
	Off	No traffic is passing.

Model Requirements

The following topics describe the power and cabling requirements for the S1050F appliance.

•”Power Requirements” on page 7

•”Cabling Requirements” on page 8

Power Requirements

The S1050F appliance requires one input of Alternating Current (AC) that must meet the following requirements:

• AC: Voltage 100V – 240V; 4 – 2 amp; 50 – 60 Hz

Next Generation Firewall Hardware Specification and Installation Guide 7