The management port LEDs indicate link and activity state, as described in the following table. Table
LED Type | Color | Description |
|
|
|
Link | Green | Link is active at 1000Mbps. |
|
|
|
| Off | Link is inactive, or is active at 10Mbps or 100Mbps. |
|
|
|
Activity | Blinking amber | Data traffic is passing. |
|
|
|
| Off | No traffic is passing. |
|
|
|
Eight 1GbE SFP fiber ports and four 10GbE SFP+ ports are also available on the S8000 Series appliances.
Model Requirements
The following topics describe the power and cabling requirements for the S8000 Series appliances.
•”Power Requirements” on page 18
•”Cabling Requirements” on page 18
Power Requirements
The S8000 Series appliances require one input of Alternating Current (AC) that must meet the following requirements:
• AC: Voltage 100V – 240V; 12 – 6 amp; 47 – 63 Hz
WARNING! Do not attempt to install a DC power supply into an NGFW Appliance. The NGFW Appliance does not contain the grounding capability for safe installation of a DC power supply. Bodily harm and damage to the system could result.
Cabling Requirements
The S8000 Series appliances ship with the following cables:
•Two AC power cables, one for each
•Null modem cable for the serial console management port
