HP UX Kerberos Data Security Software manual Adding Multiple Principals with Similar Settings

		Administering the Kerberos Server
		Adding Principals to the Database
		Adding Multiple Principals with Similar Settings
		To simultaneously add multiple principals with the same setting,
		complete the following steps:
Step	1.	In the HP Kerberos Administrator window, select the Realm in which
		you want to add multiple principals.
Step	2.	Click New to display the Principal Information window as shown in
		Figure 8-2.
Step	3.	Enter the first principal name in the Principal Information window.
Step	4.	Select the targeted settings for the principal in the General, Password,
		and Attribute tabs of the Principal Information window.
Step	5.	Click Apply to display the Change Password window.
Step	6.	Enter the initial password for the new principal and click OK.
		The new principal entry is saved in the principal database and the
		Principal Information window is still open
Step	7.	Enter another principal name in the Principal Information window, and
		repeat the steps 5 through 7 until you finish adding all the prinicpals.
Step	8.	When you have added all the new principals with the common attributes,
		click OK or Cancel to close the Principal Information window.

For additional information about adding a principal, see “Loading Default Values for a Principal” on page 152 and “Setting Administrative Permissions” on page 188.

Chapter 8 145