Migrating to a Newer Version of the Kerberos Server
Migrating from Kerberos Server Version 2.0 to Version 3.0
|
| # kdb_dump | |
Step | 2. | Copy the dump file to the system on which you are installing the v3.0 | |
|
| Kerberos server | |
Step | 3. | Install the v3.0 Kerberos daemons on the new system. | |
Step | 4. | Configure the Kerberos server v3.0. | |
|
|
| |
NOTE |
| Ensure that the following values are the same on both the versions of the | |
|
| Kerberos server: | |
|
| • | Realm name |
|
| • | Master key name |
Ensure that the master key password is identical to the one that was used in v2.0:
# krbsetup
The
You can configure the Kerberos server manually or by using the krbsetup tool. This is an interactive tool that prompts you for the required parameters. For more information, type man 1M krbsetup at the
Step 5. Load the dump file generated in step 1 using the following command:
#kdb_load
On successful completion, the following message is displayed:
Load Successful
Now, the migration process of the principal information is completed.
48 | Chapter 3 |