Administering the Kerberos Server

Group Information Window (Principal Information Window)

To edit the default group, use the HP Kerberos Administrator or the command-line administrator, discussed as follows:

•In the HP Kerberos Administrator window, complete the following steps to edit the default group:

1.Select a principal from the realm.

2.Click Edit to open the Principal Information window.

3.Choose Principal Information>Edit, and select the Edit Default Group option to display the Group Information window (Figure 8-10).

4.In the Group Information window, you can edit the settings for the default group.

•In the command-line administrator, kadminl, manually edit the default@REALM principal.

You cannot edit the key and salt type setting for the default group. For more information on using the command-line administrator, type man 1M kadmin or see “Manual Administration Using kadmin” on page 202.

Chapter 8

187