2 How to Install Accessories In Your PC

Installing Mass Storage Devices

4Remove the two bezels from the bottom shelf. The bezels snap in and out, and can be removed without any tools.

5Slide the drive completely into the bottom shelf and secure it with the screws provided with the device. Replace the side bezel.

6Connect the data and power cables to the rear of the drive and to the PC (refer to the cables and instructions that come with the tape drive).

7Replace the CD-ROM in the middle shelf.

8Install any other accessories before replacing the power supply and the cover. Reconnect all cables and power cords.

9Verify the new configuration by checking the HP Summary Screen. Refer to page 66.

34

Page 46
Image 46
HP Vectra VL 5/xxx manual