NOTE

1 Setting Up and Using Your PC

Connecting to a Network

Connecting to a Network

If your PC comes with a network connector, let your Network Administrator know you are connecting your PC to the network. Connect the network cable to the RJ-45 UTP (Unshielded Twisted Pair) LAN connector.

To enable your network connection, refer to the Integrated Network Interface Submenu in the Configuration Menu of the HP Setup program. (You can find additional information in the online Network Administrator’s Guide.)

If you need a BNC Coax connector to connect to the network, you can install an optional BNC coax adapter (order HP D3979A). Refer to "Installing a BNC Coax Adapter", on page 38.

5

Page 17
Image 17
HP Vectra VL 5/xxx manual Connecting to a Network