Meyer Sound galileo 616 operating instructions Connecting and Configuring for use with SIM3

COMPASS USER GUIDE

Assigning M Series Array Correction to an Output Channel

To apply an M-Seriesarray correction output:

1.Select:

■[Galileo Unit] > Galileo Map. In the Array Corr. column, click the button that corresponds to the channel that will be sent to the line array. The Settings > Array Correction page will be displayed.

■[Galileo Unit] > Settings > Array Correction.

2.For each output channel that is being sent to a line array, select its entry on the line corresponding to the type of Array EQ it requires. Each output channel may be assigned one array correction EQ.

Configuring MSL-4 Loudspeaker Array Correction

The Meyer Sound MSL-4is a horn-loaded long-throw speaker that can be configured for use in horizontal array clusters. When so configured, a low-mid frequency rise occurs. Compass provides a TruShaping equalization setting to correct this low-frequency emphasis.

1.Select the [Galileo Unit] > Output Processing > TruShaping page.

2.Right-click TruShaping tab. Click the TruShaping EQ Load button. A file selector window will be displayed.

3.Navigate to the Compass/Saved Settings/Examples directory and load Set TruShaping to LD-2 Array.galileoTruShapingEq.

The TruShaping equalization curve will now be set to provide low-mid frequency correction to the rise that is created by using the MSL-4in a horizontal array.

Connecting and Configuring for use with SIM3

The Galileo 616 can be configured to act as a line switcher for the Meyer Sound SIM-3022 Audio Analyzer, allowing the SIM3 to measure across all combinations of inputs and outputs without need for further patching, further increasing your efficiency and design capabilities.

51